Tere tulemast ettevõtte Schneider Electric veebisaidile

Tere tulemast meie veebisaidile.

Saadaolevate toodete vaatamiseks võite valida muu riigi. Ettevõtte teabe nägemiseks avage meie ülemaailmne veebisait.

Valige teine riik või regioon

ATV21HD22N4 Pildi tuvastamine Schneider Electric
Tootmisest maas

Kuva kõik Altivar 21

Altivar 21 - ATV21HD22N4

Variable speed drives

ATV21HD22N4 Pildi tuvastamine Schneider Electric
Tootmisest maas
Kuva kõik Altivar 21
Altivar 21 - ATV21HD22N4
Variable speed drives

variable speed drive - ATV21 - 22kW 30HP - 480V - EMC filter class A - IP20

Näita veel tunnuseid >
ATV21HD22N4  pole välja vahetatud. Lisateabe saamiseks võtke ühendust klienditoega.
Lisa jaotisesse Minu tooted Eemalda jaotisest Minu tooted

  • Main
    range of product
    Altivar 21
    product or component type
    Variable speed drive
    product destination
    Asynchronous motors
    product specific application
    Pumps and fans in HVAC
    assembly style
    With heat sink
    component name
    ATV21
    EMC filter
    Class A EMC filter integrated
    [Us] rated supply voltage
    380...480 V (- 15...10 %)
    network number of phases
    3 phases
    motor power kW
    22 kW
    motor power hp
    30 hp
    line current
    33.1 Afor 480 V
    41.6 Afor 380 V
    speed range
    1...10
    transient overtorque
    120 % of nominal motor torque +/- 10 % for 60 s
    asynchronous motor control profile
    Constant voltage/frequency ratio
    Current flux vector control (FVC) without speed feedback
    Energy saving ratio
    Quadratic voltage/frequency ratio
    Constant voltage/frequency ratio with automatic IR compensation
    communication port protocol
    Modbus
    type of polarization
    No impedance
    IP degree of protection
    IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529
    IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1
    IP21 conforming to EN/IEC 60529
    IP21 conforming to EN/IEC 61800-5-1
    IP41 on upper part conforming to EN/IEC 60529
    IP41 on upper part conforming to EN/IEC 61800-5-1
    option card
    APOGEE FLN communication card
    BACnet communication card
    LonWorks communication card
    METASYS N2 communication card
    Complementary
    supply voltage limits
    323...528 V
    supply frequency
    50...60 Hz (- 5...5 %)
    network frequency limits
    47.5...63 Hz
    apparent power
    33.2 kVAfor 380 V
    prospective line Isc
    22 kA
    continuous output current
    43.5 Aat 380 V
    43.5 Aat 460 V
    maximum transient current
    47.9 Afor 60 s
    speed drive output frequency
    0.5...200 Hz
    nominal switching frequency
    8 kHz
    switching frequency
    6...16 kHz adjustable
    8...16 kHz with derating
    speed accuracy
    +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation
    torque accuracy
    +/- 15 %
    regulation loop
    Adjustable PI regulator
    motor slip compensation
    Adjustable
    Automatic whatever the load
    Not available in voltage/frequency ratio motor control
    local signalling
    1 LED redfor DC bus energized
    output voltage
    <= power supply voltage
    insulation
    Electrical between power and control
    type of cable
    Without mounting kit: 1-strand IEC cableat 45 °C, copper 70 °C PVC
    Without mounting kit: 1-strand IEC cableat 45 °C, copper 90 °C XLPE/EPR
    With UL Type 1 kit: 3-strand UL 508 cableat 40 °C, copper 75 °C PVC
    electrical connection
    L1/R, L2/S, L3/T terminal 50 mm² / AWG 1/0
    VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 2.5 mm² / AWG 14
    tightening torque
    L1/R, L2/S, L3/T 24 N.m / 212 lb.in
    VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES 0.6 N.m
    supply
    Internal supply for reference potentiometer (1 to 10 kOhm) at 10.5 V DC, tolerance +/- 5 % <= 10 mA for overload and short-circuit protection
    Internal supply at 24 V DC, voltage limits 21...27 V <= 200 mA for overload and short-circuit protection
    analogue input number
    2
    analogue input type
    VIA switch-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits
    VIA switch-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
    VIB configurable PTC probe 0...6 probes, impedance 1500 Ohm
    VIB configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
    sampling duration
    F 2 ms +/- 0.5 ms for discrete input(s)
    R 2 ms +/- 0.5 ms for discrete input(s)
    RES 2 ms +/- 0.5 ms for discrete input(s)
    VIA 2 ms +/- 0.5 ms for analog input(s)
    VIB 2 ms +/- 0.5 ms for analog input(s)
    response time
    FLA, FLC 7 ms +/- 0.5 ms for discrete output(s)
    FLB, FLC 7 ms +/- 0.5 ms for discrete output(s)
    FM 2 ms +/- 0.5 ms for analog output(s)
    RY, RC 7 ms +/- 0.5 ms for discrete output(s)
    accuracy
    FM +/- 1 % for a temperature variation 60 °C
    VIA +/- 0.6 % for a temperature variation 60 °C
    VIB +/- 0.6 % for a temperature variation 60 °C
    linearity error
    FM +/- 0.2 %for output
    VIA +/- 0.15 % of maximum valuefor input
    VIB +/- 0.15 % of maximum valuefor input
    analogue output number
    1
    analogue output type
    FM switch-configurable current 0...20 mA, impedance 500 Ohm, resolution 10 bits
    FM switch-configurable voltage 0...10 V DC, impedance 470 Ohm, resolution 10 bits
    discrete output number
    2
    discrete output type
    FLA, FLC configurable relay logic NO, electrical service life 100000 cycles
    FLB, FLC configurable relay logic NC, electrical service life 100000 cycles
    RY, RC configurable relay logic NO, electrical service life 100000 cycles
    minimum switching current
    Configurable relay logic 3 mA at 24 V DC
    maximum switching current
    FL, R on inductive load, 2 Aat 250 V AC, cos phi = 0.4, L/R = 7 ms
    FL, R on inductive load, 2 Aat 30 V DC, cos phi = 0.4, L/R = 7 ms
    FL, R on resistive load, 5 Aat 250 V AC, cos phi = 1, L/R = 0 ms
    FL, R on resistive load, 5 Aat 30 V DC, cos phi = 1, L/R = 0 ms
    discrete input type
    F programmable 24 V DC, with level 1 PLC, impedance 3500 Ohm
    R programmable 24 V DC, with level 1 PLC, impedance 3500 Ohm
    RES programmable 24 V DC, with level 1 PLC, impedance 3500 Ohm
    discrete input logic
    F, R, RES negative logic (sink), >= 16 V (state 0), <= 10 V (state 1)
    F, R, RES positive logic (source), <= 5 V (state 0), >= 11 V (state 1)
    acceleration and deceleration ramps
    Automatic based on the load
    Linear adjustable separately from 0.01 to 3200 s
    braking to standstill
    By DC injection
    protection type
    Drive against exceeding limit speed
    Drive against input phase loss
    Drive break on the control circuit
    Drive input phase breaks
    Drive line supply overvoltage and undervoltage
    Drive line supply undervoltage
    Drive overcurrent between output phases and earth
    Drive overheating protection
    Drive overvoltages on the DC bus
    Drive short-circuit between motor phases
    Drive thermal power stage
    Motor motor phase break
    Motor thermal protection
    Motor with PTC probes
    insulation resistance
    >= 1 MOhm at 500 V DC for 1 minute
    frequency resolution
    Analog input 0.024/50 Hz
    Display unit 0.1 Hz
    connector type
    1 RJ45
    physical interface
    2-wire RS 485
    transmission frame
    RTU
    transmission rate
    9600 bps or 19200 bps
    data format
    8 bits, 1 stop, odd even or no configurable parity
    number of addresses
    1...247
    communication service
    Monitoring inhibitable
    Read device identification (43)
    Read holding registers (03) 2 words maximum
    Time out setting from 0.1 to 100 s
    Write multiple registers (16) 2 words maximum
    Write single register (06)
    marking
    CE
    operating position
    Vertical +/- 10 degree
    height
    420 mm
    width
    240 mm
    depth
    122 mm
    product weight
    26.4 kg
    Environment
    noise level
    59.9 dB conforming to 86/188/EEC
    dielectric strength
    3535 V DC between earth and power terminals
    5092 V DC between control and power terminals
    electromagnetic compatibility
    Conducted radio-frequency immunity test conforming to IEC 61000-4-6 level 3
    Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
    Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
    Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
    Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
    1.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
    standards
    EN 55011 class A group 1
    EN 61800-3
    EN 61800-3 category C2
    EN 61800-3 category C3
    EN 61800-3 environments 1 category C1
    EN 61800-3 environments 1 category C2
    EN 61800-3 environments 1 category C3
    EN 61800-3 environments 2 category C1
    EN 61800-3 environments 2 category C2
    EN 61800-3 environments 2 category C3
    EN 61800-5-1
    IEC 61800-3
    IEC 61800-3 category C2
    IEC 61800-3 category C3
    IEC 61800-3 environments 1 category C1
    IEC 61800-3 environments 1 category C2
    IEC 61800-3 environments 1 category C3
    IEC 61800-3 environments 2 category C1
    IEC 61800-3 environments 2 category C2
    IEC 61800-3 environments 2 category C3
    IEC 61800-5-1
    UL Type 1
    product certifications
    CSA
    C-Tick
    NOM 117
    UL
    vibration resistance
    1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
    1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8
    shock resistance
    15 gn for 11 ms conforming to IEC 60068-2-27
    pollution degree
    3 conforming to IEC 61800-5-1
    environmental characteristic
    Classes 3C1 conforming to IEC 60721-3-3
    Classes 3S2 conforming to IEC 60721-3-3
    relative humidity
    5...95 % without condensation conforming to IEC 60068-2-3
    5...95 % without dripping water conforming to IEC 60068-2-3
    ambient air temperature for operation
    40...50 °C with derating
    -10...40 °C without derating
    ambient air temperature for storage
    -25...70 °C
    operating altitude
    <= 2000 m
    1000...3000 m limited to 2000 m for the Corner Grounded distribution network
    Contractual warranty
    Warranty period
    18 months
  • Tagasi

    Keel
    • English
    Sertifikaat
    Kuupäev
    Suurus
    Lisa mu lemmikutesse
    Kuupäev 22.06.18
    Suurus 164.4 KB
    Kuupäev 31.05.18
    Suurus 2.3 MB
    Kuupäev 14.07.18
    Suurus 120 KB
    Instruktsioonid
    Kuupäev
    Suurus
    Lisa mu lemmikutesse
    Kuupäev 14.12.17
    Suurus 5.8 MB
    Toote utiliseerimisjuhised
    Kuupäev
    Suurus
    Lisa mu lemmikutesse
    Kuupäev 14.12.17
    Suurus 1.4 MB